To use your Spartan-Net connection, you will need a network-aware device like a Personal Computer or Laptop. If your
computer does not meet these minimum connections, your computer may not be able to function on the Spartan-Net connection.
All:
• Ethernet Card
• Ethernet Cable
Or
• Wireless Card
• Wireless Router setup
PC running Windows XP or Linux:
• Processor Speed 300 MHz or higher
• 256 Mb RAM
• Web Browser (Firefox, IE7, Chrome)
PC running Windows Vista or Windows :
• Processor Speed 1.5 GHz or higher
• 1 Gb RAM
• Web Browser (Firefox, IE8, Chrome)
Mac OS 10.4 or higher:
• G4, G5 or Intel Processor
• 256 Mb RAM
• Web Browser (Firefox, Safari, Chrome)
You will need an Ethernet port in your computer or laptop. Most personal computers and laptops today come with an Ethernet port. This port looks like a telephone jack, but larger. In order to connect your PC to the network, you will need an Ethernet cable. This cable will look similar to a phone cable, but thicker with larger ends. Follow the steps below to connect your PC to the network and begin enjoying the fastest internet service in the area.
1. Connect your ethernet cable to the wall outlet, usually labeled “Data.” If you live in an IP Advantage
community, this will be the blue port.
2. Connect the other end of your ethernet cable to the ethernet port on your Laptop or PC.
3. Turn on your PC or laptop and wait until it loads your operating system. Open your preferred
web browser and you should be able to access the Internet. If you are not able to surf the web,
make sure all cables are plugged in and there is a link light on the back of your network card.
If you are unable to get online, try the Internet troubleshooting page or give us a call at 1-866-386-7778.
A technical operator will be happy to assist you.
